2704 Table Saw

Makita 2704 Table Saw

This table saw is fitted with a powerful 1650watt motor and has a switch that incorporates an electronic soft start and an anti restart function, if the power should fail. Suitable for cutting 8' x 4' sheets, the machined table will offer you rigidity and accuracy, the standard table size is 753mm wide and 665mm long but this can be increased to 1066mm wide and 1045mm long by the addition of the sub table that can be fitted to either side of the saw. The aluminium guide fence clamps securely to the telescopic guide rule at the front of the table and at the rear of the table, the mitre fence slides within a T formed groove on either side of the blade and due to its T shape stops any lifting motion. Adjustment to the height and angle of the blade is made at the front of the machine where the angles are clearly marked, -0.5° to 45.5°. Dust extraction is at the rear of the machine and will benefit from an industrial dust extractor or powerful vacuum to remove the dust. Weighing only 30kg this machine is not solely a workshop machine; it will easily fit in to a boot of a car or small van and can be taken to the job with ease.

Features

- High Rigidity
- Telescopic Guide Rail
- 8' x 4' Sheet Capacity
- Electronic Soft Start
- Electronic Brake